Preparation of Ag3PO4/CoWO4 S-scheme heterojunction and study on sonocatalytic degradation of tetracycline

In this study, 0.6Ag₃PO₄/CoWO₄ composites were synthesized by hydrothermal method. The prepared materials were systematically characterized by techniques of scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), N₂ adsorption/desorption, and UV–vis diffuse reflectance spectrum (DRS). Furthermore, the sonocatalytic degradation performance of 0.6Ag₃PO₄/CoWO₄ composites towards tetracycline (TC) was investigated under ultrasonic radiation. The results showed that, combined with potassium persulfate (K₂S₂O₈), the 0.6Ag₃PO₄/CoWO₄ composites achieved a high sonocatalytic degradation efficiency of 97.89 % within 10 min, which was much better than bare Ag₃PO₄ or CoWO₄. By measuring the electrochemical properties, it was proposed that the degradation mechanism of 0.6Ag₃PO₄/CoWO₄ is the formation of S-scheme heterojunction, which increases the separation efficiency of electron-hole pairs (e^--h⁺) and generates more electrons and holes, thereby enhancing the degradation activity. The scavenger experiments confirmed that hole (h⁺) was the primary active substance in degrading TC, and free radicals (OH) and superoxide anion radical (O₂^–) were auxiliary active substances. The results indicated that 0.6Ag₃PO₄/CoWO₄ nanocomposites could be used as an efficient and reliable sonocatalyst for wastewater treatment.     

Improving efficiency for removal of ammoniacal nitrogen from wastewaters using hydrodynamic cavitation

The present study reports significant improvements in the removal of ammoniacal nitrogen from wastewater which is an important problem for many industries such as dyes and pigment, distilleries and fisheries. Pilot plant studies (capacity, 1 m³/h) on synthetic wastewater using 4-amino phenol as model nitrogen containing organic compound and two real industrial effluents of high ammoniacal nitrogen content were carried out using hydrodynamic cavitation. Two reactor geometries were evaluated for increased efficiency in removal-orifice and vortex diode. Effect of initial concentration (100–500 mg/L), effect of pressure drop (0.5–5 bar) and nature of cavitating device (linear and vortex flow for cavitation) were evaluated along with effect of salt content, effect of hydrogen peroxide addition and aeration. Initial concentration was found to have significant impact on the extent of removal: ~ 5 g/m³ removal for initial concentration of 100 mg/L and up to 12 g/m³ removal at high concentration of 500 mg/L. Interestingly, significant improvement of the order of magnitude (up to 8 times) in removal of ammoniacal nitrogen could be obtained by sparging air or oxygen in hydrodynamic cavitation and a very high removal of above 80% could be achieved. The removal of ammoniacal nitrogen by vortex diode was also found to be effective in the industrial wastewaters and results on two different effluent samples of distillery industry indicated up to 75% removal, though with longer time of treatment compared to that of synthetic wastewater. The developed methodology of hydrodynamic cavitation technology with aeration and vortex diode as a cavitating device was found to be highly effective for improving the efficiency of the conventional cavitation methods and hence can be highly useful in industrial wastewater treatment, specifically for the removal of ammoniacal nitrogen.     

从废水到新能源:光催化燃料电池的优化与应用

随着经济的飞速发展,社会对能源的需求日益扩大,对工业废水的无害化处理也提出了更高的要求。光催化燃料电池 (photocatalytic fuel cell, PFC) 在燃料电池中引入半导体光催化材料作为电极,实现了有机污染物高效降解和同步对外产电的双重功能,在废水无害化与资源化利用方面具有潜在的应用价值。半导体光催化电极是PFC系统高效运行的核心组件,增强其可见光响应和光生载流子分离是提高PFC性能的关键策略。反应器结构设计和运行参数优化也有利于改善PFC性能。本文从PFC基本原理和应用入手,综述了PFC在环境污染物资源化处理中的研究进展,并详细阐述了提高PFC的污染控制性能和产电效率的优化手段,为进一步设计高效稳定的PFC系统并实现其在水污染控制和清洁能源生产中的应用提供理论指导。     

Rapid and easy quantification of elemental sulphur in aqueous samples from biological reactors: the turbidimetric method revisited

Recent developments in wastewater treatment have led to a renewed interest to obtain elemental sulphur (S°) as a by-product from bioreactors. However, practical studies are limited by the gap of adequate analytical techniques for its determination. This paper provides a statistical study and matrix effect evaluation of an adapted spectrophotometric method for routine S° analyses in aqueous samples, based on a methodology previously described by Hart (1961). Four complex matrices were tested: domestic sewage and effluent samples from three different bioreactors. Tested performance criteria included linearity, matrix effect, limit of detection and quantification and S° recovery. Results were linear (R² = 0.99994) in the studied range (5 to 100 mg S° L^?1) and no matrix effect was observed. The accuracy was based on recovery values that varied from 100% to 106%. The colloidal S° separation and extraction protocol was also considered suitable for aqueous samples, reaching more than 99.0% of S° recovery.     

Influence of the pH Value on the Hydrothermal Degradation of Fructose

The hydrothermal treatment of sugars features a promising technology for the production of fine and platform chemicals from renewable resources. In this work the hydrothermal decomposition of fructose was studied in a buffered medium at a pH range between 2.2 and 8.0. It is demonstrated that at lower pH values mainly 5-hydroxymethylfurfural (HMF), levulinic acid and humin are generated, while lactic acid and acetic acid are produced at higher pH values. The work shows that the use of moderate acidic conditions may have advantages for the hydrothermal HMF production over the use of strongly acidic conditions, as especially the degradation into levulinic acid is suppressed. Besides, this study deals with a rather complex reaction network, hence limitations and need for adaption of the kinetic model are discussed.     

Effect of nitrogen plasma treatment on the crystallinity and self‐bonding of polyetheretherketone (PEEK) for biomedical applications

Polyetheretherketone (PEEK) is a thermoplastic material with outstanding properties and high potential for biomedical applications, including hermetic encapsulation of active implantable devices. Different biomedical grade PEEK films with initial degree of crystallinity ranging from 8% to 32% (with or without mineral filling) were inspected. PEEK surfaces were treated with nitrogen RF plasma and the effects on materials crystallinity and self‐bonding were evaluated. In particular, the relationship between auto‐adhesive properties and crystalline content of PEEK before and after plasma treatment was examined. PEEK samples showed different bonding strength depending on their degree of crystallinity, with higher self‐bonding performance of mineral‐filled semi‐crystalline films. XRD did not show any modification of the PEEK microstructure as a result of plasma treatment, excluding a significant influence of crystallinity on the self‐bonding mechanisms. Nevertheless, plasma surface treatment successfully improved the self‐bonding strength of all the PEEK films tested, with larger increase in the case of semi‐crystalline unfilled materials. This could be interpreted to the increase in chain mobility that led to interfacial interpenetration of the amorphous phase.     

Experimental studies on the effect of ultrasonic treatment and hydrogen donors on residual oil characteristics

Residual oil, the residue after the distillation of crude oil, imposes deleterious effects on refinery due to its high viscosity and asphaltene content. In this context, ultrasonic technology has been widely applied in refining processes given its high efficiency and minimal environmental impacts. To guide the selection of operation parameters, in this work, we probed the effect of treatment duration, power, and hydrogen donor on the characteristics of residual oil under ultrasonic treatments. Underlying mechanisms of ultrasonic treatments, in the absence and presence of hydrogen donors, were verified through systematically analyzing viscosity, component conversion, molecular weight, hydrogen distribution, and functional groups of residual oil. While viscosity reductions under low-power density treatment are caused by colloidal system disaggregation, high-power density treatment can bring in both chemical bond cleavage and colloidal system disaggregation. In addition, adding hydrogen donor can effectively prevent radical recombination, and thus increases the yield of saturate. These results provide fundamental understandings on the effects of ultrasonic treatments.     

通过表面机械加工调控Zr52.5Cu17.9Ni14.6Al10Ti5非晶合金的结构和韧性

作为一种新型结构材料, 非晶态合金的韧性需要进一步提高. 提高非晶态合金韧性的方法有引入枝晶相、调整其成分改变其泊松比影响其剪切带衍生、裂纹扩展等.本文通过表面机械加工的方法来调控非晶态合金的微观结构及韧性. 我们采用真空电弧熔炼、亚稳态薄板离心浇铸系统制备了Zr_52.5Cu_17.9Ni_14.6Al₁₀Ti₅ (原子百分比) (Vit105)非晶合金板,并用表面机械研磨处理方法(surface mechanical attrition treatment, SMAT), 在Vit105板上形成纳米尺度局域类晶体序结构. 基于差示扫描量热分析、纳米压痕实验, 我们发现SMAT处理后的Vit105合金板表面附近弛豫焓更低, 微观结构更加均匀、稳定. 通过显微维氏硬度计测试, 发现SMAT处理后样品的表面附近硬度增大,硬度值分布也更均匀. 通过三点弯断裂实验, 可得到SMAT处理后合金板缺口韧度值从70.7 ± 4.7 MPa·m1/2提高到112.8 ± 3.7 MPa·m1/2. SMAT处理后合金板断裂后, 缺口前端剪切带密度比未处理的更大. Vit105合金板韧性的提高源于SMAT处理对剪切带萌生的促进作用. 该研究表明,表面机械加工可以在非晶态合金中形成局域类晶体有序结构, 影响其结构均匀性, 增大其硬度, 促进剪切带萌生, 提高其韧性. 表面机械加工作为一种新型的改变材料性能的手段, 具有广阔的应用前景.